The Destination 2.3-I insert is really a blend of technological improvement and design advancement. It first started with the choice of cast iron as the material of choice for the smooth, contemporary surround. The faceplate was then developed to allow a flush finish with the masonry fireplace. Maintenance of electrical components was made easy with the conception of a slick, drawer-like system to which the blower assembly attaches. Insertion into larger openings is facilitated by the installation of an optional sheet metal backing that conveniently attaches to the cast iron faceplate.

Starting at : $2,299 US*
*All black

  • Model # : EB00021
  • High-efficiency EPA certified appliance
  • Recommended Heating Area (sq. ft.) : 750 à 2100
  • Ultra-quiet crossflow blower with variable speed control included (CFM) : 120
  • Color : Metallic black
  • Glass air-wash system
  • Steel thickness (top) : 5/16"
  • Optimum efficiency : 77.2%
  • Emissions : 3.85 g/h
  • Baffle : High heat-resistant C-cast
  • Recommended chimney diameter : 6''
  • Tested or/and listed as per applicable standards by : Intertek
  • Firebox dimensions (Depth) 16 3/4"

  • Firebox dimensions (Width) 21"

  • Firebox dimensions (Height) 11 7/8"

  • Maximum log length 20''

  • Door opening dimensions (Width) 18"

  • Door opening dimensions (Height) 11 7/8"

  • Glass Surface 11 7/8'' X 18''

  • Steel thickness (body) 3/16"

  • Weight 485lb

  • Firebox volume (cu. ft.) 2.3

  • Minimum fireplace opening (Width) 28 7/8"

  • Minimum fireplace opening (Height) 23 3/4"

  • Minimum fireplace opening (Depth) 19 5/8"

  • Glass Type Ceramic glass

  • Depth - Overall 22 7/8''

  • Height - Overall : 25 1/8''

  • Width - Overall 36''

  • Canadian Standard (emissions) CSA B415.1-10

  • USA standard (emissions) EPA Method 28

  • Canadian Standard (safety) ULC S628

  • USA standard (safety) UL 1482

  • Centre line of flue outlet to the back 5 5/8"

  • Centre line of flue outlet to the side 13 1/2"

  • Maximum output - EPA test wood 32,200

  • Maximum output - seasoned cord wood 75,000

  • Type of Fuel Wood

  • Type of Chimney (°F) 2100

  • Log positioning Over width

  • Recommended Heating Area (sq. ft.) 750 à 2100

  • Steel thickness (top) 5/16"

  • Optimum efficiency 77.2%

  • Emissions 3.85 g/h

  • Baffle High heat-resistant C-cast

  • Recommended chimney diameter 6''

  • Warranty Limited lifetime

  • Tested or/and listed as per applicable standards by Intertek

Printable Templates

pdf

PDF File

This PDF file allows you to easily manipulate, transfer, print, etc.

Customer reviews

83% of the last 18 homeowners who have registered their warranty are satisfied with this product
* * * * *

Installed the Destination 2.3I insert myself by direct connect, the 4" projection kit made this purchase possible because of depth of existing fireplace. The surround and the appearance of this unit look to be ahead of it's time. Assembly/Installation took approx 2 days and four good Men to get the empty firebox near its final resting point. Seem's like a solid and well built unit which has been running near all day on weekends and during some week night evenings. The fan is quiet and the fire is kept under controll by the air controll and loading lightly even produces great heat. This was a search of more than two years for a insert that had the looks and rating's and dimensions and a fair price to meet our requirements to purchase. The Destination 2.3I at this point, (ONE MONTH IN) seem's like the real deal for serious quality conscious buyer. Im glad you guy's put the serial number on the packet bag, great idea, I didn't have to pull the unit for my # to register for warranty. I have request nearly every evening to fire up the insert, it's a heat that cant be matched by our Geothermal. It will make for a great backup to those really cold night's that the Geothermal runs constantly. Fortunately those really cold nights are not great in number here in Kentucky at least lately anyway.

By Scott M. , Maceo, USA
03/01/2013
The reviews your are reading come from homeowners who have bought the product and registered their warranty online. Therefore, in order to write a review, you must have purchased the product and you must register your warranty using our Warranty Registration section. Information about your product, such as its serial number, will be requested.

Heating cost calculation

Select your country
What is your current annual heating cost ?
What type of combustible do you currently use ?
Can you specify the unit cost of your actual combustible ?
What is the combustible you wish to compare ?
Can you specify the unit cost of combustible to compare ?
Your annual estimated saving with
* For wood, all calculations are based on a full cord measuring 1,2 m X 1,2 m X 2,4 m (4 ft X 4 ft X 8 ft). In certain regions of Canada, we call a cord what is in fact a third of a cord: 0,4 m X 1,2 m X 2,4 m (16 in X 4 ft X 8 ft). If what you buy is a third of a cord, multiply the price by 3. For the efficiency variable, we assume in our calculations that the stove used is one tested according to the EPA or CSA B415.1 standards.
Terms and conditions

Terms and Conditions

1. This calculator enables you to compare your current heating system and combustible with other heating systems or combustibles. However, we deny any responsibility and offer no guarantee as to the accuracy and integrality of the data supplied.

2. The results obtained from this calculator must only serve as a guide and cannot replace the detailed calculations performed by a specialist. For a detailed evaluation of your heating costs, please consult a professional.

3. By using this calculator, you automatically agree to the conditions stated above.

4. This calculator was carefully programmed. However, some computer errors may occur. If you encounter any error, please do not hesitate to communicate with us at : marketing@sbi-international.com

 

Minimum clearances to combustibles * (Data expressed in inches. 1 inch = 25.4 mm)
Minimum clearances to combustibles *
(Data expressed in inches. 1 inch = 25.4 mm)
Combustible side mantle to unit 12"
Side wall (room) 16"
Combustible top mantle to unit 20"
Combustible shelf to unit 22"
Minimum floor protection in front of unit Canada : 18"
USA : 16"
Projection in the room minimum / maximum 2" - 4"

Options

Faceplates

AC01321 - 44" X 6" BOTTOM FACEPLATE BACKING PLATE
AC01321
AC01322 - 29" X 44" FACEPLATE BACKING PLATE KIT
AC01322
AC01323 - PROJECTION KIT FOR INSERT - 2" OR 4"
AC01323
AC01332 - 29" X 50" FACEPLATE BACKING PLATE KIT
AC01332
AC01333 - 50" X 6" BOTTOM FACEPLATE BACKING PLATE
AC01333

Fire screens

AC01315 - FIRE SCREEN
AC01315

Accessories

Adhesives, gaskets and insulation
HIGH TEMPERATURE RED SILICONE (300 ML-10.1  FL.OZ )

AC02040

HIGH TEMPERATURE RED SILICONE (300 ML-10.1 FL.OZ )

A premium quality 100% silicone sealant that stays permanently flexible. Suitable for sealing around oven windows, flues on gas appliances, joints and metal stacks and ductwork. An excellent gasket maker to replace existing cork and felt rubber. Ideal for holding gaskets around stove and fireplace doors. Oxygen sensor safe. Withstands continuous temperatures up to 260°C or 500°F.


HIGH TEMP. CLEAR SILICONE (300 ML-US 10.1 FL.OZ)

AC02045

HIGH TEMP. CLEAR SILICONE (300 ML-US 10.1 FL.OZ)

A premium quality 100% silicone sealant that stays permanently flexible. Suitable for sealing around oven windows, flues on gas appliances, joints and metal stacks and ductwork. An excellent gasket maker to replace existing cork and felt rubber. Ideal for holding gaskets around stove and fireplace doors. Oxygen sensor safe. Withstands continuous temperatures up to 204°C or 400°F.


CERAMIC WOOL 16" x 24" X ½" THICK

AC02530

CERAMIC WOOL 16" x 24" X ½" THICK

1 piece of 16" x 24" - 1/2" thick


SILICONE AND 5/8" X 8' BLACK GASKET KIT

AC06500

SILICONE AND 5/8" X 8' BLACK GASKET KIT

Includes 8 feet of gasket and one tube of original high-temp adhesive.


Paint
METALLIC  BLACK STOVE PAINT-342G AEROSOL

AC05959

METALLIC BLACK STOVE PAINT-342G AEROSOL

Fits most appliances with a metallic black finish.


METALLIC BLACK STOVE PAINT - 85G AEROSOL

AC05963

METALLIC BLACK STOVE PAINT - 85G AEROSOL


Maintenance products
ASH VACCUM (BLACK)

AC02582

ASH VACCUM (BLACK)


ASH VACCUM (BLACK) User guide

6" ROUND  BRUSH (3/8" npt)

AC04500

6" ROUND BRUSH (3/8" npt)

Useful to sweep your chimney.


FIBERGLASS ROD 4', (3/8"  npt) - 12 PER BOX

AC04508

FIBERGLASS ROD 4', (3/8" npt) - 12 PER BOX

Useful to sweep your chimney.


NYLON ROD 4' (1/4" npt) - 6 PER BOX

AC04509

NYLON ROD 4' (1/4" npt) - 6 PER BOX

Useful to sweep your chimney.


PULL RING (3/8" npt)

AC04511

PULL RING (3/8" npt)

Useful to connect to brushes such as brushes #AC04500, #AC04501, and #AC04502.


ADAPTER KIT (3/8" NPT à 1/4" NPT)

AC04512

ADAPTER KIT (3/8" NPT à 1/4" NPT)

Useful to connect flexible rod #AC04509 to fiberglass rod #AC04508.


WOOD STOVE AND FIREPLACE GLOVES

AC07820

WOOD STOVE AND FIREPLACE GLOVES

Recommended for a clean and safe use of any type of wood-burning appliance.


DRY CLEANING PAD - Atmosfire

AC07824

DRY CLEANING PAD - Atmosfire


GLASS CLEANER (500 ML-US 16.9 FL. OZ)

AC07825

GLASS CLEANER (500 ML-US 16.9 FL. OZ)

Recommended for cleaning the glass of any type of wood-burning appliance.


Meters
DIGITAL MOISTURE READER

AC07835

DIGITAL MOISTURE READER

Ideal to accurately measure moisture content in wood logs.


DIGITAL MOISTURE READER User guide

Adapters
LINER FASTENING SYSTEM

AC02006

LINER FASTENING SYSTEM


LINER FASTENING SYSTEM User guide

Fire starters
SBI FIRE LIGHTING GEL -(1L- 32oz.liq.us)

AC02550

SBI FIRE LIGHTING GEL -(1L- 32oz.liq.us)

Recommended for lighting-up oil, wood, and pellet stoves. Leaves no residue. Odorless. 


FIRE-LIGHTING (wood particles and wax)

AC02595

FIRE-LIGHTING (wood particles and wax)


SACHET POUCHES FIRE STARTER (50u.)

AC02597

SACHET POUCHES FIRE STARTER (50u.)


FIRE LIGHTING GEL (500 ML-16OZ)

AC04099

FIRE LIGHTING GEL (500 ML-16OZ)

Recommended for lighting-up oil, wood, and pellet stoves.  Leaves no residue.  Odorless.


Government Incentives